Table of Contents
Advertisement
Using the optical disc drive
Operation is the same for all optical media drives. The full-size drive
provides high-performance execution of CD/DVD-based programs. You
can run either 12 cm (4.72") or 8 cm (3.15") CDs without an adaptor. An
ATAPI interface controller is used for CD/DVD operation. When the
computer is accessing a CD/DVD, an indicator on the drive glows.
Refer also to the
for precautions on writing to CD/DVD.
Loading discs
To load a disc, follow the steps below and refer to the figures.
1. a.
b. Pressing the eject button will not open the drawer when the disc
User's Manual
Writing CD/DVD with the DVD Super Multi drive
When the power is on, press the eject button to open the drawer
slightly.
drive's power is off. If the power is off, you can open the drawer by
inserting a slender object (about 15 mm) such as a straightened
paper clip into the eject hole just to the right of the eject button.
Eject Button
Pressing the eject button
Operating Basics
section
4-16
Advertisement
Table of Contents
