External Monitor; Hdmi - Toshiba PSU40C-DW208C User Manual

External monitor

An external analog monitor can be connected to the external monitor port on
the computer. Refer to Appendix B,
supports several video modes. To connect a monitor, follow the steps below.
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor's power on.
4. Turn the computer on.
When you turn on the power, the Windows
Logo) appears on the display device.
However, the Windows
used last time to shut down your PC, if the display device exists when you
turn on the power.
To change the display settings, press Fn + F5. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F5 to
switch to the internal display. Refer to Chapter 5,
on using hot keys to change the display setting.

HDMI

A HDMI monitor can be connected to the HDMI out port on the computer.
1080p, 1080i, 720p, 576p and 480p signal formats can be supported. But
actual signal format you can use depends on HDMI monitor. To connect
monitor, follow the steps as detailed below:
■
As the port operation of all HDMI (High-Definition Multimedia Interface)
monitors has not been confirmed, some HDMI monitors may not
function properly.
1. Plug one end of the HDMI cable into the HDMI port of the HDMI device.
2. Plug the other end of the HDMI cable into the HDMI out port on your
computer.
User's Manual
Display
®
Desktop appears on a display device that you
Connecting a HDMI cable
Optional Devices
Controller. The computer
®
Bootup screen (Windows
The Keyboard, for details
®
8-11