Boot Device Priority; Summary Screen; Setting Passwords - HP Brio 80xx Online Manual

3 The HP Setup Program
HP Setup Program

Boot Device Priority

You can select the order of the devices from which the BIOS attempts to boot the operating system. During POST, if the
BIOS is unsuccessful at booting from one device, it will then try the next one on the Boot Device Priority list until an
operating system is found. The default boot device is the floppy disk.
The Boot Device Priority can be changed through the Boot menu. Use the or arrows to move along the top
of the main menu bar to its location. The item is then highlighted and displays the available boot options.
Main Advanced Security Power Boot Exit
To select the boot device, use the and arrows, then press the key to move the device up the list, or the
key to move it down the list.

Summary Screen

This is one of the Boot menu options. A summary screen displays a summary of the current configuration and settings of
your PC. This option is disabled by default. You can enable the summary screen option, by accessing the Boot menu (as
explained above), and then use the legend keys to change the value.

Setting Passwords

You can set passwords to provide different levels of protection for your PC. The passwords are set in the Security menu
group of the Setup program, and are disabled by default.
If you have set both a Supervisor Password and a User Password, and you enter the Setup program by using the User
Password, you will be restricted in your ability to change setup items. If you enter the Setup program with a Supervisor
Password, you will have no restrictions.
36