Printing The Pictures - Panasonic DMCFH22 - DIGITAL STILL CAMERA Operating Instructions For Advanced Features

[PLAYBACK] Mode: 5

Printing the Pictures

If you connect the camera to a printer supporting PictBridge, you can select the pictures
to be printed and instruct that printing be started on the camera's LCD Monitor.
• If the pictures are recorded on a card you can also use it by means of inserting directly
to an SD Memory Card slot of your printer. For details, refer to the operating instructions
of the printer.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
A USB connection cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight
out. (Otherwise the connectors may be bent out of shape which may cause malfunction.)
B Align the marks, and insert.
• Use a battery with a sufficient battery power or the AC adaptor (optional) and DC
coupler (optional). If the remaining battery power becomes low while the camera and the
printer are connected, the status indicator blinks and the alarm beeps. If this happens
during printing, stop printing at once. If not printing, disconnect the USB connection
cable.
1
Connect the camera to a printer via the USB connection cable A
(supplied).
• When the camera is connected to the printer, the cable disconnect prohibit icon
[1] appears. Do not disconnect the USB cable while [1] is displayed.
2
Touch [PictBridge(PTP)].
Connecting to other equipment
- 117 -


AV OUT
DIGITAL
USB MODE
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
PC