Replacing The Usb Keyboard Or Mouse - Lenovo ThinkCentre A70 User Manual

Figure 29. Removing the front audio and USB assembly
10. Reinstall the front bezel. See "Removing and reinstalling the front bezel" on

Replacing the USB keyboard or mouse

This section provides instructions on how to replace the USB keyboard or mouse.
36
User Guide
5. Note the front audio and USB assembly cable routing and remove the screw
that secures the front audio and USB assembly. Then, remove the front audio
and USB assembly from the chassis.
6. Route the cables of the new front audio and USB assembly through the hole
in the chassis.
7. Position the new front audio and USB assembly to the chassis so that the
screw hole in the new front audio and USB assembly is aligned with the
corresponding hole in the chassis.
8. Install the screw to secure the new front audio and USB assembly in place.
9. Connect the new front audio and USB assembly cables to the system board.
See "Locating parts on the system board" on page 11.
page 15.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v To complete the replacement, go to "Completing the parts replacement" on
page 37.
Attention
Do not open your computer or attempt any repair before reading and understanding the
"Important safety information" in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
http://www.lenovo.com/support