Installing Add-In Cards - HP Pavilion xt800 - Desktop PC Manual

Warning:
Do not pull the DIMM out of the
socket. Use the retaining clips to eject the
DIMM.
11 Holding the DIMM by its edges only, lift it
away from the socket. Store it in its
antistatic packaging.
To install a new DIMM in this socket, see
"Installing a DIMM."

Installing Add-In Cards

At some point, you may want to add a card
to the computer to accommodate a new
component, such as a scanner, or to upgrade
an existing card.
Warning:
Do not overload the system by
installing add-in cards that draw excessive
current. The system is designed to provide 2
amps (average) of +5 V power for each
board/card in the computer. The total +5 V
current draw in a fully loaded system (one
with all add-in card slots filled) must not
exceed the total number of slots multiplied by
2 amps.
Avertissement :
Ne surchargez pas
l'ordinateur en installant des cartes
d'extension qui consomment beaucoup de
courant. L'ordinateur est conçu pour fournir
un courant de 2 ampères (en moyenne), +5
volts, à chaque carte installée sur l'ordinateur.
La consommation totale de courant de +5 V
sur un ordinateur entièrement chargé (dont
tous les logements de cartes sont occupés)
ne doit pas excéder le nombre total de
supports multiplié par 2 ampères.
To add or replace an add-in card:
1 Turn off the computer and all peripherals.