SMX_SAStorageVolume
4-3-3
SMX_SAStorageVolume implements the HPSA_StorageVolume class and represents the Logical
Volumes configured on the Smart Array.
Table 4-4
Class: SMX_SAStorageVolume (CIM_StorageVolume)
Property name
ElementName
Name
EnabledDefault
EnabledState
RequestedState
CreationClassName
DeviceID
SystemCreationClassName
SystemName
ConsumableBlocks
BlockSize
DataRedundancy
DeltaReservation
ExtentStatus[0]
IsBasedOnUnderlyingRedundancy
NoSinglePointOfFailure
NumberOfBlocks
PackageRedundancy
Property implementation
CIM_ManagedElement
Logical drive number with raid description (for
example, Logical Volume 1 (RAID 1+0)
CIM_ManagedSystemElement
VPD Pg83 identifier for the volume.
CIM_LogicalElement
CIM_EnabledLogicalElement
2 (Enabled)
5 (Not Applicable)
12 (Not Applicable)
CIM_LogicalDevice
SMX_SAStorageVolume
Opaque Key
SMX_SAArraySystem
SMX_SAArraySystem.Name
CIM_StorageExtent
0
Block Size in bytes
1 (RAID 0, RAID 5, RAID 6, RAID 50, RAID 60)
2 (RAID 1+0)
0
This indicates extended status for the volume.
2 (None)
11 (Rebuild – Volume is currently rebuilding data)
False
True – RAID 1 or above
False – RAID 0
Total Number of blocks on the volume.
0 (RAID 0)
1 (RAID 1+0, RAID 5)
2 (RAID 6, RAID 50, RAID 60)
Smart Array 48