Xerox 6180N - Phaser Color Laser Printer Color Management Manual page 46

Using color tools
4-12
Figure 4-9. OPI setup dialog
This process works as follows:
1. An image repository is created on the DocuSP controller that
contains all of the full-resolution images that will be employed
by the document creators.
2. An OPI Search path is created in the Setup menu so that the
DocuSP controller knows where to find a local copy of the
full-resolution tiff image.
3. A queue is set up with OPI Substitution enabled. This feature
is found in the Queue Properties: PostScript/PDF tab.
4. A low-resolution image is created as an analogue to each full-
resolution image; these are distributed to the document
creators.
5. The document creators position the images in their
documents, and include placement, sizing and cropping
information as well as OPI comments (these are generally
done by the application).
NOTE: Supported applications include (but are not limited
to) Pagemaker™, InDesign™, Quark™, and Freehand™)
6. The job is submitted to the DocuSP controller's OPI-enabled
queue.
Color Management Guide