Control panel setup
Function table and default factory settings
DCP-8110DN, DCP-8150DN, DCP-8155DN, MFC-8510DN and MFC-8520DN
The factory settings are shown in Bold with an asterisk.
Note
(For MFC-8510DN and MFC-8520DN)
• LDAP, Internet Fax, Fax to Server and Scan to E-mail Server functions are available as a download.
• In order to use this function, please download the necessary firmware from the "Downloads" page for your
model on the Brother Solutions Center at http://solutions.brother.com/.
Main menu
Submenu
5.Network
1.TCP/IP
(DCP-8110DN,
DCP-8150DN
and
DCP-8155DN)
7.Network
(MFC-8510DN
and
MFC-8520DN)
Menu selections
Options
1.Boot Method
Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be asked
to enter how many times the machine tries to obtain the IP
address.)
2.IP Address
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
[000-255].[000-255].[000-255].[000-255]
3.Subnet Mask
[000].[000].[000].[000]*
4.Gateway
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name
BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config
Auto*
Static
Primary
7.WINS Server
Secondary
1
1
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
4
4
4
65