Menu item
Color Correction
Auto
Off
Manual
Print Resolution
1200 dpi
4800 CQ
Toner Darkness
1–5
Enhance Fine Lines
On
Off
Color Saver
On
Off
RGB Brightness
-6–6
Description
Adjusts the color output on the printed page
Notes:
Auto is the factory default setting. Auto applies different color conversion tables
•
to each object on the printed page.
Off turns off color correction.
•
Manual allows customization of the color tables using the settings available from
•
the Manual Color menu.
Due to the differences in additive and subtractive colors, certain colors that appear
•
on computer monitors are impossible to duplicate on the printed page.
Specifies the printed output resolution
Notes:
4800 CQ is the factory default setting.
•
1200 dpi provides the highest resolution output, and increases gloss.
•
Lightens or darkens the printed output
Notes:
4 is the factory default setting.
•
Selecting a smaller number can help conserve toner.
•
If Print Mode is set to Black Only, a setting of 5 increases toner density and darkness
•
to all print jobs.
If Print Mode is set to Color, a setting of 5 is the same as a setting of 4.
•
Enables a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts
Notes:
Off is the factory default setting.
•
To set Enhance Fine Lines from the software program, with a document open,
•
click File ª Print, and then click Properties, Preferences, Options, or Setup.
To set Enhance Fine Lines using the Embedded Web Server, type the network
•
printer IP address in a browser window.
Reduces the amount of toner used for graphics and images. The amount of toner used
for text is not reduced.
Notes:
Off is the factory default setting.
•
On overrides Toner Darkness settings.
•
Adjusts brightness in color outputs
Notes:
0 is the factory default setting.
•
-6 is the maximum decrease. 6 is the maximum increase.
•
This does not affect files where CMYK color specifications are being used.
•
Understanding printer menus
118