Asus P2E-N User Manual page 13

III. INSTALLATION
Jumpers
1) JP1
Expansion Slots
1) DIMM Sockets
2) SEC CPU Slot
3) SLOT 1*
4) PCI 1, 2
Hardware Monitor
1) RT4
Connectors
1) PS2KBMS
2) PS2KBMS
3) GAME
4) PRINTER
5) COM1, COM2
6) VGA
7) COM-OUT (optional) p. 25 Television Connector (RCA & 4-pin Female S-Video)
8) USB
9) IR
10) POWER
11) IDE1
12) FLOPPY
13. LAN_LED, WOL_
14) PAN_CON
15) MIC_CON
16) AMC
17) AUDIO
18) CPU_FAN
19) VGA Memory
20) CDROM
*
The onboard hardware monitor uses the address 290H-297H so legacy ISA cards
must not use this address or else conflicts will occur.
ASUS P2L-N/P2E-N User's Manual
p. 13 Audio Setting (Enable/Disable)
p. 15 168-Pin DIMM Memory Expansion Sockets
p. 17 Single Edge Contact CPU Support
p. 22 16-bit ISA Bus Expansion Slots*
p. 22 32-bit PCI Bus Expansion Slots
p. 20 Pentium II Processor Thermal Sensor Connector
p. 24 PS/2 Keyboard Connector (6-pin Female)
p. 24 PS/2 Mouse Connector (6-pin Female)
p. 24 Joystick or MIDI Connector (15-pin Female)
p. 25 Parallel (Printer) Port Connector (25-pin Female)
p. 25 Serial Port COM1 and COM2 (Two 9-pin Male)
p. 25 VGA Compatible Connector (15-pin Female)
p. 26 Universal Serial BUS Ports 1 & 2 (Two 4-pin Female)
p. 26 Infrared Module
p. 26 NLX Motherboard Power Connector (20-pin Block)
p. 27 Primary IDE Connector (40-pin Block)
p. 27 Floppy Drive Connector (34-pin Block)
p. 27 LAN Activity Connectors (2-pin & 3-pin)
p. 28 Front Panel Display LEDs and Switches (16-1 pin)
p. 28 Front Panel Microphone Jack Connector (2 pin)
p. 30 ATI Multimedia Connector (40-3 pin Block)
p. 30 Back Panel Audio Connectors (10-1 pin Block)
p. 30 CPU Fan Power (3-pin Block)
p. 31 Onboard VGA Memory Expansion Sockets (40 pins)
p. 31 CD-ROM Drive Connector (50-1 pins)
13