Storage Confi Guration - ASROCK 990FX Extreme4 User Manual

User manual
Hide thumbs Also See for 990FX Extreme4:
Table of Contents

Advertisement

3.4.4 Storage Configuration
SATA Controller
This item is for SATA3_1 to SATA3_6 ports. Use this item to enable or dis-
able the "SATA Controller" feature.
SATA Mode
This item is for SATA3_1 to SATA3_6 ports.Use this item to adjust SATA
Mode. The default value of this option is [IDE Mode]. Confi guration op-
tions: [AHCI Mode], [RAID Mode] and [IDE Mode].
If you set this item to RAID mode, it is suggested to install
SATA ODD driver on SATA3_5 or SATA3_6 port.
SATA IDE Combined Mode
This item is for SATA3_5 and SATA3_6 ports. Use this item to enable or
disable SATA IDE combined mode. The default value is [Enabled].
If you want to build RAID on SATA3_5 and SATA3_6 ports,
please disable this item.
Marvell SATA3 Operation Mode
This item is for Marvell SATA3_7 and SATA3_8/eSATA3 ports. Use this
item to adjust the "Marvell SATA3 Operation Mode" feature. Confi guration
options: [IDE Mode], [AHCI Mode] and [Disabled]. The default value is [IDE
Mode].
Marvell SATA3 Bootable
Use this to enable or disable Onboard Marvell SATA3 Option ROM. If
Option ROM is disabled, UEFI cannot use the SATA device to connect to
59

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 990FX Extreme4 and is the answer not in the manual?

Table of Contents