Haier HWM55-7288P User Manual page 11

b Steps of using the operation buttons and description
of the steps
REMAIN(MINUTES)
RESERVE(HOURS)
1.Push "POWER ON/OFF"button to switch on the power
2.Push " PROGRAM " button to select suitable
automatic program
After the power is switched on, " SOAK " is
automatically set. To select other fully-auto program,
please push the " PROGRAM " button till the corresponding
indicator is on. Refer to the " Program " button on Page 10.
If STANDARD program is set, the machine will execute fuzzy detection. The computer " "
will set the water level and wash time as per the cloth and quantity of the laundries. The
whole procedure is under automatic control.
Attention
Even there's no water in the tub, the
spinning will start after a certain period.
Wash and spin after putting the damageable
clothes into tuck net, to avoid scathe.
Wash the laundries that are prone to lose
colors separately from other laundries.
When washing start or opening cover intermitting, the washing machine
will begin to work after a period time, this is normal phenomenon.
Only select RINSE program,If there's water inside the tub, the machine
will spin before rinsing ,If there's no water the machine will rinse directly
The pulsator will not rotate unless the water is filled to selected water level.
FLASH FLASH LIGHT LIGHT
WASH
RINSE
SPIN
TUB DRY
RESERVE
WATER LEVEL
STANDARD Fuzzy
SOAK
SOFT
QUICK
START
PAUSE
PROGRAM
Page 10
POWER
ON/OFF
POWER
ON/OFF
PROGRAM