HP Probook 5310m Maintenance And Service Manual page 95

Select
System Configuration menu (continued)
Device Configurations (continued)
Built-In Device Options
Maintenance and Service Guide
To do this
■ Enable/disable Data Execution Prevention. When enabled,
the processor can disable some virus code execution,
which helps to improve computer security.
■ Enable/disable LAN Power Save (select models only).
When enabled, saves power by turning off the LAN when
not in use (enabled by default).
■ SATA (Serial Advanced Technology Attachment) device
mode. The following options are available:
❐ AHCI (Advanced Host Controller Interface)
❐ IDE (Integrated Drive Electronics)
❐ RAID (select models only)
✎
Availability of the options above varies by
computer model.
■ Enable/disable secondary battery fast charge (enabled
by default).
■ Enable/disable HP QuickLook 3 (enabled by default).
■ Enable/disable Virtualization Technology (select models
only; disabled by default).
■ Enable/disable TXT (Intel Trusted Execution Technology)
(select models only; disabled by default).
■ Enable/disable Dual Core CPU (select models only;
enabled by default).
■ Enable/Disable Unified Extensible Firmware Interface
(UEFI) mode (disabled by default).
■ Turn the Numlock state at boot on or off.
■ Enable/disable the wireless button state (enabled
by default).
■ Enable/disable the embedded WLAN device (enabled
by default).
■ Enable/disable embedded WWAN device radio (select
models only; enabled by default).
■ Enable/disable embedded Bluetooth device radio (enabled
by default).
■ Enable/disable the Network Interface Controller (LAN)
(enabled by default).
■ Enable/disable LAN/WLAN switching (disabled by default).
■ Set the wake on LAN state. Options include the following:
❐ Disabled
❐ Boot to Network (set by default)
❐ Follow Boot Order
■ Enable/disable the fingerprint device (enabled by default).
Computer Setup
(Continued)
5–11