Sharp Aquos LC-46D64UA Operation Manual page 57

Other viewing options
Auto Power On
If this is activated, the One Touch Play function is
enabled.
While the TV is in standby mode, it automatically turns
on and plays back the image from the HDMI source.
Press MENU to display the MENU screen, and
1
then press c/d to select "Option".
Press a/b to select "AQUOS LINK Setup",
2
and then press ENTER.
Press a/b to select "Auto Power On", and
3
then press ENTER.
Auto Power On
Selecting Recorder
Press c/d to select "Yes", and then press
4
ENTER.
Press MENU to exit.
5
Yes No
Selecting Recorder
When multiple AQUOS LINK-compatible devices are
connected, this function allows you to set the recorder
for recording when you press REC on the TV's remote
control.
Press MENU to display the MENU screen, and
1
then press c/d to select "Option".
Press a/b to select "AQUOS LINK Setup",
2
and then press ENTER.
Press a/b to select "Selecting Recorder",
3
and then press ENTER.
Auto Power On
Selecting Recorder
Press MENU to exit.
4
NOTE
Example : when connecting AQUOS LINK-compatible
recorder via AQUOS LINK-compatible Audio
system
Auto Power On
Selecting Recorder
Input
INPUT4
INPUT4
INPUT5
When an AQUOS LINK-compatible Audio system
or other equipment is connected between the TV
and recorder, "Sub" is displayed.
Input Location
INPUT4 [1.0.0.0]
INPUT5 [2.0.0.0]
Location
[1.0.0.0]
[1.0.1.0]
[2.0.0.0]
55