[Format]; Initializing The Card; Format Initializing The Card - Panasonic Lumix DMC-FX01W Operating Instructions Manual

User manual
Table of Contents

Advertisement

3 Press 2 1 to determine the
horizontal position and press the
shutter button to set.
ADJUST.
SET:SHUTTER
• Use 3/4 to set the frame position for
pictures rotated vertically.
• The message [DELETE ORIGINAL
PICTURE?] appears.
4 Press 3/4 to select [YES] or
[NO] and then press [MENU/SET].
ASPECT CONV.
DELETE ORIGINAL
PICTURE?
CANCEL
• The picture is overwritten when you
select [YES]. If you convert the aspect
ratio of a picture and then overwrite it,
you cannot restore it.
• A picture with the converted aspect
ratio is newly created when you select
[NO].
• When the original picture is protected,
you cannot overwrite it. Select [NO] and
newly create a picture with the
converted aspect ratio.
5 Press [MENU/SET] twice to close
the menu.
• After converting the aspect ratio, the
picture size may become larger than that
of the original picture.
EXIT
MENU
YES
NO
MENU
SELECT
SET
MENU
/SET
• The following pictures cannot be
converted.
– Pictures with audio
– Motion pictures
• Files that do not conform to the DCF
standard cannot be converted. DCF is an
abbreviation of [Design rule for Camera
File system], stipulated by JEITA [Japan
Electronics and Information Technology
Industries Association].

[FORMAT]

Initializing the card

Press [
] to display the [PLAY] mode
MENU
/SET
menu and select the item to set. (P68)
Usually, it is not necessary to format the
card. Format it when the message
[MEMORY CARD ERROR] appears.
Press 3 to select [YES] and then
press [MENU/SET].
FORMAT
DELETE ALL DATA
ON THE MEMORY CARD?
SELECT
• Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use a battery with sufficient battery power
(P12) or the AC adaptor (DMW-AC5;
optional) when formatting.
• Do not turn the camera off during
formatting.
• You cannot format an SD Memory Card
when the card's write protect switch is set
to [LOCK].
• If the card cannot be formatted, consult
your nearest servicentre.
Menu Settings
YES
NO
MENU
/SET
MENU
SET
VQT0W06
77

Advertisement

Table of Contents
loading

Table of Contents