Table of Contents
Advertisement
Connecting an External Display Device
Connecting to the monitor port
You can experience a wider screen by connecting the computer to
a monitor, TV or projector with a monitor port.
You can give better presentations by connecting the computer to
a projector.
1
Connect the RGB port of the computer and the port of the
monitor or TV with the monitor cable (15 pin).
External
Monitor
2
Connect the power cord of the connected monitor, TV or
projector and turn the power on.
TV
Projector
3
Press the
+
screen appears where you can select the monitor mode.
Since pressing the
changes the selection, select a display device.
LCD
CRT
LCD+CRT Clone
LCD+CRT Dual View
•
If the screen is not switched even if you press the
key combination, you have to install the Easy
+
Settings program.
Alternatively, to set up dual view:
•
Open the Display Settings window in the Control Panel,
select Monitor 2 and select the Expand to fit to this
monitor checkbox to set dual view. For more detailed
information, refer to the Windows online help.
Chapter 2.
Using the computer
key combination once. Then the setting
key while holding down the
56
key
Advertisement
Table of Contents
