Confirm Your Network Environment; Connected To A Computer With A Wlan Access Point/Router In The Network (Infrastructure Mode) - Brother RJ4040 RuggedJet w/WiFi User Manual

Configuring your printer for a wireless network

Confirm your network environment

Connected to a computer with a WLAN access point/router in the network
(Infrastructure mode)
1 WLAN access point/router
1
If your computer supports Intel
point.
2 Wireless network printer (your printer)
3 Wireless capable computer connected to the WLAN access point/router
4 Wired computer (which is not wireless capable) connected to the WLAN access point/router with
an Ethernet cable
5 Smartphone
Install method
The following instructions will offer the methods for installing your Brother printer in a wireless network
environment. Choose the method you prefer for your environment.
 Wireless configuration temporarily using a USB cable (Recommended)
See Wireless configuration temporarily using a USB cable (Recommended) uu page 8.
 One-push wireless configuration using WPS
See One-push configuration using Wi-Fi Protected Setup uu page 9.
4
1
® ®
My WiFi Technology (Intel MWT), you can use your computer as a Wi-Fi Protected Setup supported access
5
1
2
3
3
3
3
3
6