Epson LQ-2550 - Impact Printer Product Support Bulletin page 11

EPSON
EPSON AMERICA, INC.
Subject: LQ - 2550 Selectype Functions
Date: 9/12/89
Page: 1 of 2
This describes the Selectype functions in detail.
changed in the same manner.
Manual on pages 3 - 12 through 3 - 29 and in the Technical Manual on pages
1 - 30 through 1 - 33.
Selectype Functions
1 Press the "Selectype" button on the front panel.
The arrows will be flashing and the LCD panel will read "Selectype
2
Mode".
3. The LCD panel changes to read: "Load Macro".
4. Press the Line Feed Button (the flashing down arrow) to reveal on
the LCD panel, "Change Macro".
5.
To change the macro, press the Load/Eject button to enter the "Change
Macro" mode.
6. Use the tine Feed button (the flashing down arrow) to select the
function to be changed.
7.
To change the desired function, such as font, pitch, country, etc...,
within the "Change Macro" mode, press the Load/Eject button.
8.
To change the selection of the function, use the Form Feed button (the
flashing up arrow) or the tine Feed button (the flashing down arrow).
9.
Once the desired functions within "Change Macro" are selected, press
the On - tine button.
10.
Press the On - tine button a second time to save the macro.
11.
Wait for the LCD panel to read "Save Macro".
12.
Press the Load/Eject button to select save.
13.
The LCD panel will then read "Macro #X Saved" momentarily and then
will read "Change Macro".
14.
Press the "Selectype" button to exit Selectype.
Tips for other Selectype uses
1. When changing the defaults, reset the printer by cycling the
Power switch.
INFORMATION
Product Support Bulletin
This subject is also covered in the User's
PSB No: P-0050
Originator: ML
Macros and defaults are