Front Panel Header - Gigabyte GA-B75M-D3H User Manual

Manual
Hide thumbs Also See for GA-B75M-D3H:
Table of Contents

Advertisement

8) F_PANEL (Front Panel Header)
Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator
on the chassis to this header according to the pin assignments below. Note the positive and negative pins
before connecting the cables.
G
MSG/PWR
(Message/Power/Sleep LED):
Connects to the power status indicator on the chassis front panel. The LED is
System Status LED
on when the system is operating. The LED keeps blinking when the system is
S0
On
in S1 sleep state. The LED is off when the system is in S3/S4 sleep state or
S1
Blinking
powered off (S5).
S3/S4/S5
Off
PW
(Power Switch):
Connects to the power switch on the chassis front panel. You may configure the way to turn off your system
using the power switch (refer to Chapter 2, "BIOS Setup," "Power Management," for more information).
Speaker
(Speaker):
Connects to the speaker on the chassis front panel. The system reports system startup status by issuing
a beep code. One single short beep will be heard if no problem is detected at system startup.
HD
(Hard Drive Activity LED):
Connects to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is
reading or writing data.
RES
(Reset Switch):
Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer if
the computer freezes and fails to perform a normal restart.
CI
(Chassis Intrusion Header):
Connects to the chassis intrusion switch/sensor on the chassis that can detect if the chassis cover has
been removed. This function requires a chassis with a chassis intrusion switch/sensor.
The front panel design may differ by chassis. A front panel module mainly consists of power switch,
reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis
front panel module to this header, make sure the wire assignments and the pin assignments are
matched correctly.
Message/Power/
Power
Sleep LED
Switch
2
1
Hard Drive
Reset
Activity LED
Switch
Chassis
Intrusion Header
- 18 -
Speaker
20
19
Power LED

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents