Gigabyte GA-9IVDTH User Manual page 55

Halt On
The category determines whether the computer will stop if an error is detected during power up.
NO Errors
All Errors
Mid
Memory RAS Feature Control
Select specified features for DIMMs. Sparing or Memory Mirroring.
Standard
Sparing
Clear Mem. ECC Error Info
Enabled
Disabled
Fatal Error on port A
Enabled
Disabled
The system boot will not stop for any error that may be detected
and you will be prompted.
Whenever the BIOS detects a non-fatal error the system will be
stopped.
The system boot will not stop for a keyboard or disk error; it will
stop for all other errors. (Default value)
Select Standard as Memory RAS Feature. (Default value)
This feature allows user to uses a spare online bank to provide
DIMM fail-over capabilities when a pre-defined threshold of single-
bit correctable errors is reached.
Enable Clear memory ECC error information function.
Disable this function. (Default value)
Enable Fatal Erre on port A. (Default value)
Disable this function.
5 5
BIOS Setup