Gigabyte GA-9IVDTH User Manual page 27

V / W ) IPMB 1 / 2 (IPMB Connectors)
X ) BAT1 (Battery)
If you want to erase CMOS...
1.Turn OFF the computer and unplug the power cord.
2.Remove the battery, wait for 30 second.
3.Re-install the battery.
4.Plug the power cord and turn ON the computer.
Connector Introduction
Pin No.
1
1
2
3
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
2 7
Definition
SMBus Clock
GND
SMBus Data