Gigabyte GA-990XA-UD3 User Manual page 39

** DCTs Addr/Cmd Timing **
Addr/Cmd Setup Time
Options are: Auto (default), 1/2T, 2T.
Addr/Cmd Fine Delay
Options are: Auto (default), 0/64~31/64.
CS/ODT Setup Time
Options are: Auto (default), 1/2T, 2T.
CS/ODT Fine Delay
Options are: Auto (default), 0/64~31/64.
CKE Setup Time
Options are: Auto (default), 1/2T, 2T.
CKE Fine Delay
Options are: Auto (default), 0/64~31/64.
Channel interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. (Default: Enabled)
Bank Interleaving
Enables or disables memory bank interleaving. Enabled allows the system to simultaneously access dif-
ferent banks of the memory to increase memory performance and stability. (Default: Enabled)
DQS Training Control
Enables or disables memory DQS training each time the system restarts. (Default: Skip DQS)
CKE Power Down Mode
Determines whether to set the memory to power down mode when the CKE pin is closed. (Default: Dis-
abled)
Memclock tri-stating
Determines whether to enable memory clock tri-stating in CPU C3 or Alt VID mode. (Default: Disabled)
******** System Voltage Optimized ********
System Voltage Control
Determines whether to manually set the system voltages. Auto lets the BIOS automatically set the
system voltages as required. Manual allows all voltage control items below to be configurable. (Default:
Auto)
CPU PLL Voltage Control
Allows you to set the CPU PLL voltage.
Normal Supplies the CPU PLL voltage as required. (Default)
2.025V ~ 3.135V The adjustable range is from 2.025V to 3.135V.
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
- 39 - BIOS Setup