Light Bulb Replacement - GE JVM1540WMC Owner's Manual

DTP_EN-EN_350A4502P651.qxd

Light Bulb Replacement

Cooktop Light/
Night Light
Replace the burned-out
bulb with a 120 volt,
40-watt incandescent bulb
(WB36X10003), available
from your Mabe supplier.
Oven Light
Replace the burned-out
bulb with a 120 volt,
40-watt incandescent bulb
(WB36X10003), available
from your Mabe supplier.
10/19/2007 10:21 AM
1 To replace the bulb(s),
first disconnect the power
at the main fuse or circuit
breaker panel or pull the
plug.
2 Remove the screw at the
front of the light cover
and lower the cover.
Remove screw
1 To replace the oven light,
first disconnect the power
at the main fuse or circuit
breaker panel or pull the
plug.
2 Remove the top grille by
taking out the 2 screws
that hold it in place.
Screws
3 Remove the charcoal
filter (if present) to
access the light cover
(see Remove Charcoal
Filter Section)
Page 33
3 Be sure the bulb(s) to be
replaced are cool before
removing. After breaking
the adhesive seal, remove
the bulb by gently turning.
Replace with the same size
and type bulb.
4 Raise the light shield and
replace the screw.
Connect electrical power
to the oven.
4 Remove the light cover
located near the center of
the oven that holds the
bulb. After breaking the
adhesive seal, remove the
bulb by gently turning.
Replace with the same size
and type bulb.
Light Cover
5 Replace the light cover
and charcoal filter (if
present)
6 Replace the grille and
screws. Connect electrical
power to the oven.
33