Table of Contents
Advertisement
Editing an Existing Contact Entry
Once stored in the Contacts, an entry can be changed quite
easily.
Find the desired entry in the Contacts list. (For more
1.
information, refer to "Finding a Contacts Entry" on
page 36.)
Press the Edit soft key. The Edit Contact screen appears in
2.
the display with the contact name highlighted.
Highlight a number stored in this contact entry.
3.
To backspace and delete numbers, press
4.
To clear all numbers in the highlighted field, press and hold
5.
.
Note: You can also add numbers (such as a Fax number) to the entry, assign
it to a Group, and add other information.
When you're finished editing the entry, press
6.
changes are saved and a confirmation message appears in
the display.
39
Adding Pauses to Contacts Numbers
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
P pause — A hard pause stops the calling sequence until further input
•
from you.
T pause — A four-second pause stops the calling sequence for two
•
seconds and then automatically sends the remaining digits.
.
Tip: You can enter multiple four-second pauses to extend the length of a
pause. For example, two consecutive four-second pauses cause a total
pause time of eight seconds.
Note: Keep in mind that pauses count as digits towards the 32-digit
maximum.
Store Pauses in a New Contacts Entry
. Your
In standby mode, enter the number you wish to store (such
1.
as your bank's teleservice number).
Press the Options soft key.
2.
The following menu options appear in the display:
Advertisement
Table of Contents
