Samsung SCH-R600 Series User Manual page 112

Wait for the beep and say the digits using your normal tone
3.
of voice. After a moment, the phone plays back the
recording and prompts "Did the recording sound ok?"
• If the recording was good, say "Yes."
• If you need to re-record, say "No."
• If you want to exit this menu, say "Cancel."
• If you did not understand the command say "Repeat."
If you say "No," the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you're satisfied with the recording.
After confirming that the recording sounds "ok", continue
4.
the recording process with the next set of digits.
After 10 sets of digits, the phone asks whether you want to
5.
do more adaptation. Answer "Yes."
Repeat steps 4 and 5 for another 10 sets of digits. After the
6.
second group of 10 sets of digits, "Adaptation complete"
plays through the speaker and you are returned to the Digit
Dialing menu.
109
Reset Digits
To reset digit dialing to factory default settings, do the following:
From the Main menu, select Menu
1.
➔
Settings Digit Dialing
you to confirm digit reset.
Press the OK soft key or press
2.
adaptation, or press the Back soft key or press
cancel.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
From the Main menu, select Menu
1.
➔
Settings Sound. The following options appear in the
display:
• Prompts — On/Off — Enables or disables audio prompts.
• Digits — On/Off — Enables or disables digit playback.
• Names — On/Off — Enables or disables name playback.
• Name Settings — Lets you adjust the Speed (Faster or Slower)
and Volume (Louder or Softer) of your phone's audio name
playback.
Select the desired option.
2.
➔ ➔
Voice SVC Voice
➔
Reset Digits. The phone prompts
to reset your digit
➔ ➔
Voice SVC Voice
to