Asus MEZ User Manual page 33

III. HARDWARE SETUP
24. Reset Switch Lead (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting
your computer without having to turn off your power switch. This is a preferred
method of rebooting to prolong the life of the system's power supply.
25. System Power LED (3-1 pin PWR.LED)
This 3-1 pin connector connects the system power LED, which lights when the
system is powered on and blinks when it is in sleep mode.
26. Keyboard Lock Switch Lead (2-pin KEYLOCK)
This 2-pin connector connects to the case-mounted key switch to allow key-
board locking.
27. System Warning Speaker Connector (4-pin SPEAKER)
This 4-pin connector connects to the case-mounted speaker. You may leave this
disconnect if your motherboard has an onboard buzzer which can replace the
chassis speaker. When connected, you will hear system warnings through both
sources.
NOTE: Some sound cards allow you to connect to the system speaker signal so
that the warnings can be heard and adjusted through your multimedia system.
28. Power Supply Thermal Sensor Connector (2-pin JTPWR)
If you have a power supply with thermal monitoring, you can connect its ther-
mal sensor cable to this connector.
1 0 1 0 1 0
MEZ Thermal Sensor Connector
JTPWR
Power Supply Thermal Sensor
ASUS MEZ User's Manual 33