Asus MEZ User Manual page 29

III. HARDWARE SETUP
15. IDE Device Activity LED (2-pin IDELED)
This connector supplies power to the cabinet's hard disk or IDE activity LED.
Read and write activity by devices connected to the Primary or Secondary IDE
connectors will cause the LED to light up.
1 0 1 0 1 0
MEZ IDE Activity LED
16. SB-Link™ Connector (6-1 pin SBLINK)
If you have a Sound Blaster compatible PCI audio card, you must link it to this
connector. Otherwise, you will have compatibility issues under DOS environment.
1 0 1 0 1 0
MEZ SB-Link™ Header
TIP: If the case-mounted LED does not
light, try reversing the 2-pin plug.
IDELED
NOTE: Pin 3 is removed to ensure the
correct orientation of the cable on it.
PC/PCI Request
Sideband Signal
DGND
PC/PCI Grant
Sideband Signal
ASUS MEZ User's Manual
2
4 6
Serial IRQ
DGND
1 5
29