Browser
WAP setting
• If the settings have made by the service provider, you may begin
immediately.
• If access profiles have assigned by your service provider, select a profile
and activate it.
• Otherwise, you may key in setting manually. For appropriate settings,
contact your network operator or service provider.
Key in the service settings manually
1. In WAP menu, choose Edit profile in Settings, press OK.
2. Choose a profile, press OK, choose Edit profile, press Edit to start setting.
You need to key in the information in Homepage, Data account, Username,
Password and IP address in your phone. To get the information, you may
need to contact your operator.
! Note
In most cases, you only need to use one of the default profiles to access the Internet.
The settings are different from operator to operator. Please consult your operator or
service provider for the correct settings and proceed with care. Wrong settings will
cause the connection to fail.
Activate WAP settings
After you complete all WAP settings (see WAP settings function), in WAP
Profile mode, please choose Activate profile, then press OK.
Browser options
You can set the timeout value for the browser. The purpose is to stop the
browser connecting the website if the website does not respond within the
timeout. Also, you can choose either On or Off the image while browsing.
26