2
On the Photo Control Panel, click the CLIP button to enter the Clipping mode.
Drag the clipping cursor over the Photo Viewer window until the part of the photo
image you want to print is enclosed in an outline.
To cancel the selection, click the CLIP button again.
3
Click the CLOSE button on the Photo Control Panel.
Note
³
The size of the clipped area depends upon the Artwork/Layout album mode
option you selected. When the selected mode is Fixed photo size printing,
Borderless printing (Tiled photo), or Canon perforated paper printing, the
clipped area is fixed in its height-width ratio.
Clipped photo
Photo area to be clipped
Clipping a Photo
147