Manual; Network Setup - Denon AVR 4308 - Sony Bravia 40" TV Owner's Manual

g Manual EQ
Adjust tonal quality for each speaker using graphic
equalizer.
Adjust CH
Select speaker adjustment method.
Each L/R All
[Selectable items]
Manual EQ
Select the speaker and frequency band and adjust the level.
63 125 250 500
[Selectable items]
8k 16k
–20dB ~ +6dB
[Variable range]
Curve Copy
Copy "Flat" curve from Room EQ.
Yes No
[Selectable items]
"Curve Copy" is displayed after the auto setup procedure has been
performed.
Default
Resets the settings to the default values.

Network Setup

Make network settings.
F Menu tree F
Manual Setup
Network Setup
Network Setup
Other
Network Information
a Network Setup
Make settings for wired or wireless LAN.
Wired LAN
Make settings for wired LAN.
1k 2k 4k
At the GUI menu "Manual Setup" – "Network
Setup" – "Detail" setting, set "DHCP" to "OFF"
and enter the IP address, subnet mask, default
gateway, primary DNS and secondary DNS.
At the GUI menu "Manual Setup" – "Network
Setup" – "Proxy" setting, set "Proxy" to "ON"
and enter the address or domain name and
port numbers.
Recheck the connections and settings if you cannot connect to the Internet (vpage 20).
NOTE Knowledge about networks is required to make the IP address and proxy settings. For details, consult a network administrator.
Turn on the AVR-4308CI's power.
The mode automatically switches to "Wired" .
To enter the IP address manually
To connect via proxy server
This setting is required when the network
is established via proxy servers.
This completes the setting.
If a Ethernet cable is connected
To acquire the IP address automatically
using the DHCP function
To not pass through the proxy server
32