9 • Troubleshooting . . . . . . . . . . . . . . . . . . . . 14 • To reduce the risk of fire, electrical shock, or motor damage, do not use a solid-state speed control with this fan. Use only Hunter speed controls.
Page 3
Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods.
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Do not over tighten. Flat Washer 3” Wood Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. 42739-01 • 02/20/09 • Hunter Fan Company...
Assemble securely with three low profile screws. 3-7. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim. Low Profile Screw Step 3-7 U-shaped Hole 42739-01 • 02/20/09 • Hunter Fan Company...
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42739-01 • 02/20/09 • Hunter Fan Company...
2. Press firmly on opposite sides of the ring toward the canopy. The tabs will flex out releasing the trim ring from the canopy. Step 5-3 Steps 5-4 – 5-5 Canopy Screw 42739-01 • 02/20/09 • Hunter Fan Company...
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades.
7 • Completing Your Installation With or Without a Multi Staked Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture.
Page 11
190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. Steps 7-8 – 7-10 42739-01 • 02/20/09 • Hunter Fan Company...
Install and tighten the two screws Speed you removed previously from the other switch housing. Switch 7-20. Carefully place the capacitors in the switch housing. 7-21. Continue with Step 7-6. 42739-01 • 02/20/09 • Hunter Fan Company...
Page 13
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 42739-01 • 02/20/09 • Hunter Fan Company...
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. # 400 Memphis, Tennessee 38016 42739-01 • 02/20/09 • Hunter Fan Company...