Canon Elura 40MC Instruction Manual page 80

Downloading Still Images/Movies with the ImageBrowser
Notes:
About the other buttons
• [SELECT]: Selects or deselects all images.
[ROTATE]: Rotates the image (90 degrees counterclockwise/90 degrees
clockwise/180 degrees).
[IMAGE INFO]: Displays the number of pixels and file size of the selected
image.
• [SLIDE/DPOF]:
- The SLIDE function (selecting a still image to be included in the slide show)
cannot be used.
- The DPOF index print and date/file name settings are not supported by the
camcorder. Therefore, setting or erasing a print mark on the camcorder will
cancel the index print and date/file name setting.
- The [DPOF] setting in the ImageBrowser allows marking up to 998 still
images for printing. However, the maximum number for print marks on
the camcorder is limited to 200. Therefore, setting or erasing a print mark
on the camcorder will cancel all print marks after the 200th still image.
How to Check and Change Various Camera Settings
You can adjust the date, time and owner settings in the Camera Settings
dialog using the computer when the camcorder is connected. You can also
check the remaining memory capacity.
1. Click the [Setup Options] button and select [Camera Settings] from the
displayed menu.
2. Check or change the settings.
Input a camcorder owner name here
(up to 31 characters).
Set the date and time here.
Click this button to synchronize the camcorder
to the computer's date and time settings.
Check the battery charge here.
Click this to format the memory card in the camcorder.
Check the remaining memory capacity here.
80