Installing the Software
6.
Confirm the program selection and click the [Next] button.
• The installation starts.
• Follow the on-screen messages to proceed with the installation.
• If the "Digital signature not found" message appears, click the [Yes]
button.
7.
Select your camcorder model name and click the [Next]
button.
8.
After the installation is complete and the installer panel
displays again, click the [Exit] button.
• The installer panel disappears.
9.
Remove the DIGITAL VIDEO SOLUTION DISK once the
installation is complete so that the proper driver may be
installed.
Notes:
• The DIGITAL VIDEO SOLUTION DISK is not needed for installing the USB
driver. Remove the disk once the installation is complete.
• Continue with the procedures on page 14 to install the driver software to
allow the camcorder to be connected to a computer via the USB interface
and download images.
• For uninstalling programs contained in the DIGITAL VIDEO SOLUTION DISK
such as the ZoomBrowser EX, see "Uninstalling the Software" (
12
66).