Table of Contents
Advertisement
English
Adjustment Contents
0
Menu
Brightness
Temperature
(p. 50)
Gamma
(p. 49)
Saturation
Hue
Gain
6 colors
Reset
34
4. ADJUSTMENT
Function Descriptions
To set the brightness of the
screen
To set the color temperature
NOTE
The values shown in the Kelvin are available only as a reference tool.
Setting the temperature under 4,000 K or over 10,000 K invalidates the
color temperature setting. (The color temperature's setting turns "OFF".)
To set the gamma value
NOTE
If setting the gamma value, the using the monitor in the digital signal
input is recommended.If using the monitor in the analog input signal, set
the gamma value from 1.8 to 2.2.
To change the saturation
NOTE
The <Saturation> adjustment may cause undisplayable color tone.
To change the flesh color, etc. -20 ~ 20
NOTE
The <Hue> adjustment may cause undisplayable color tone.
To change each color
(red, green and blue)
NOTE
The values shown in the percentage are available only as a reference tool.
Setting the <Temperature> (p. 50) invalidates the <Gain> adjustment.
<Gain> setting returns to the defaul.
To adjust <Saturation> and
<Hue> in each color (Red,
Yellow, Green, Cyan, Blue
and Magenta)
To return the color settings of
the selected mode to the
default settings
Adjustable range
0 ~ 100 %
4,000 ~ 10,000 K
in 500 K increments (including 9,300 K).
Default setting is off (normal white)
1.8 ~ 2.6 (in 0.2 increments)
-16 ~ 16
Setting the minimum level (-16) turns the
image to the monochrome.
0 ~ 100%
By adjusting the red, green and blue color
tones for each mode, custom colors can be
defined. Display a white or gray
background image and adjust the <Gain>.
Hue: -20 ~ 20
Saturation: -16 ~ 16
Select the "Reset".
Advertisement
Table of Contents
