Table of Contents
Advertisement
English
2.
Plug the power cord into the power connector on the rear of the
monitor.
3.
Lead the power cord and signal cable into the cable holder at rear
of the monitor.
NOTE
The cables are recommended to lead with slight sag for the smooth motion
of the stand and the Portrait/Landscape display.
4.
Plug the other end of the cord into a power outlet.
The monitor's power indicator will flash yellow slowly.
Use the enclosed power cord and connect to the
standard power outlet of your country.
Be sure to remain within the rated voltage of the power
cord.Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may result in fire or electric shock.
14
2. CABLE CONNECTION
Cable Holder
WARNING
Advertisement
Table of Contents
