Power On / Off - Panasonic TH-103PF9UK - 103" Plasma Panel Operating Instructions Manual

Power ON / OFF

Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma Display
with the clamper. (see page 9)
Connecting the plug to the Wall Outlet
Press the Power switch on the Plasma Display to turn the set
on: Power-On.
Power Indicator: Green
Example: The screen below is displayed for a while after the
Plasma Display is turned on. (setting condition is an
example.)
When the POWER is turned on for the fi rst
time, the LANGUAGE selection screen is
displayed.
From the second time on, language selection
can be done from the setup menu. (see
page 18)
Select the desired language using the
button and press the ACTION ( ) button.
Press the
Power Indicator: Red (standby)
Press the
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the
when the Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
OSD LANGUAGE
or
button on the remote control to turn the Plasma Display off.
button on the remote control to turn the Plasma Display on.
Remote Control
Sensor
English (UK)
Deutsch
Français
Italiano
Español
ENGLISH (US)
Русский
SELECT SET
switch on the unit,
Right side surface
Main Power
On / Off Switch
Power Indicator
From the second time on, the screen
shown below is displayed for a while
(setting condition is an example).
PC
F ULL
13