Eizo FlexScan L768 User Manual page 26

English
0
Menu
Brightness
Temperature To set the color temperature
Gamma
Saturation
Hue
Gain
Reset
26
4. ADJUSTMENT
Function Descriptions
To set the brightness of the
screen
NOTE
The values shown in the Kelvin are available only as a reference tool.
Setting the temperature under 4,000 K or over 10,000 K invalidates the
color temperature setting. (The color temperature's setting turns "OFF".)
To set the gamma value
NOTE
If setting the gamma value, the using the monitor in the digital signal
input is recommended.
To change the saturation
NOTE
The <Saturation> adjustment may cause undisplayable color tone.
To change the flesh color, etc. -32 ~ 32
NOTE
The <Hue> adjustment may cause undisplayable color tone.
To change each color
(red, green and blue)
NOTE
The values shown in the percentage are available only as a reference tool.
Setting the <Temperature> invalidates the <Gain> adjustment. <Gain>
setting returns to the defaul.
To return the color settings of
the selected mode to the
default settings
Adjustable range
0 ~ 100 %
4,000 ~ 10,000 K
in 500 K increments (including 9,300 K).
Default setting is off (normal white)
1.8 ~ 2.6 (in 0.2 increments)
-128 ~ 127
Setting the minimum level (-128) turns the
image to the monochrome.
0 ~ 100%
By adjusting the red, green and blue color
tones for each mode, custom colors can be
defined. Display a white or gray
background image and adjust the <Gain>.
Select the <Reset>.