Installing The Software - Canon 9192A006 - FAXPHONE L80 B/W Laser Software User's Manual

If your current printer purchase is replacing a MultiPASS printer, you
must remove the MultiPASS software installed on your system before
installing the new printer. For instructions on removing the MultiPASS
software, see the software user's guide that came with your MultiPASS
software.

Installing the Software

You are ready to install the software once you have prepared your
system, as described in the "Before You Begin the Installation: a
Checklist" section.
If the software has been placed on a local or network drive, you can install
the software on your system from that drive, rather than using the
installation disk. For instructions, see Appendix B.
Reminder: Do not connect the USB cable before installing the software.
To install the software:
1. Insert the installation disk into your disk drive.
2. If AutoRun is enabled, the installation starts automatically.
Chapter 2 Installing the Printer Driver 2-3
2