Asus M5A97 EVO R2.0 User Manual page 117

Updating the BIOS file
To update the BIOS file using BIOS Updater:
1. At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
D:\>bupdater /pc /g
2. The BIOS Updater screen appears as below.
ASUSTek BIOS Updater for DOS V1.30 [2012/12/22]
FLASH TYPE:
Current ROM
BOARD:M5A97 EVO R2.0
VER: 0206
DATE: 06/18/2012
PATH:
A:\
M5A97E20.CAP 2097152 2012-01-06 17:30:48
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
3. Press <Tab> to switch between screen fields and use the <Up/Down/Home/End> keys
to select the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
Are you sure to update BIOS?
4. Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
• For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
• Ensure to load the BIOS default settings to ensure system compatibility and stability. Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3
of your motherboard user manual for details.
• Ensure to connect all SATA hard disk drives after updating the BIOS file if you have Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
ASUS M5A97 EVO R2.0
MX1C 25L1065A
Update ROM
BOARD:
VER:
DATE:
[Tab] Switch
[B] Backup
Yes No
UNKNOWN
UNKNOWN
UNKNOWN
[V] Drive Info
[Esc] Exit
3-43