Table of Contents
Advertisement
2.6.7
NB Thermal Protect [Enabled]
Allows you to enables or disables NB Thermal Protect. If set to [Enabled], the system will
shut down when the temperature of NB is over 95ºC to protect the NB chipset. Configuration
options: [Enabled] [Disabled]
2.7
Boot menu
The Boot menu items allow you to change the system boot options. Select an item then
press <Enter> to display the sub-menu.
Main
Ai Tweaker
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
2.7.1
Boot Device Priority
1st ~ xxth Boot Device [xxx Drive]
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system. Configuration options: [Removable Dev.] [Hard Drive]
[ATAPI CD-ROM] [Disabled]
• To select the boot device during system startup, press <F8> when ASUS Logo appears.
• To access Windows
•
•
2.7.2
Boot Settings Configuration
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while booting
to decrease the time needed to boot the system. When this item is set to [Disabled], BIOS
performs all the POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
Enables or disables the full screen logo display feature. Configuration options: [Disabled]
[Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
ASUS M5A88-M EVO
M5A88-M EVO BIOS Setup
Advanced
Power
OS in Safe Mode, do any of the following:
®
Press <F5> when ASUS Logo appears.
Press <F8> after POST.
Boot
Tools
Exit
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:)
may appear when you set
the CD-ROM drive as the
first boot device.
Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit
Version 0203
2-25
Hide quick links:
Advertisement
Table of Contents
