Asus M4A88TD-M/USB3 User Manual page 64

User manual
Hide thumbs Also See for M4A88TD-M/USB3:
Table of Contents

Advertisement

Updating the BIOS file
To update the BIOS file using BIOS Updater
At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
1.
D:\>bupdater /pc /g
2.
The BIOS Updater screen appears as below.
ASUSTek BIOS Updater for DOS V1.00b [09/06/22]
Current ROM
BOARD:
VER:
0205 (H:00 B:08)
DATE:
03/31/2010
PATH:
A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
3.
Press <Tab> to switch between screen fields and use the <Up/Down/Home/End> keys
to select the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
Are you sure to update BIOS?
Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
4.
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
3-8
M4A88TD-M/USB3
M4A88TDU.ROM
2097152 2010-01-11 17:30:48
[Tab] Switch
[B] Backup
Yes
No
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Setup Defaults item under the Exit BIOS menu. See Chaper 3 of
your motherboard user manual for details.
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
Update ROM
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[V] Drive Info
[Esc] Exit
Chapter 3: BIOS setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents