Table of Contents
Advertisement
3.
Serial ATA connectors (7-pin SATA1-6)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk
and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA
1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the
standard parallel ATA with 133 MB/s (Ultra DMA133). If you install Serial ATA hard disk
drives, you can create RAID 0, RAID 1, RAID 0+1, and JBOD configurations through
the onboard SB710 chipset.
M4A88T-M
M4A88T-M SATA connectors
• Install the Windows
• If you intend to create a Serial ATA RAID set using these connectors, set the SATA
Port1-Port4 and SATA Port5-Port6 items in the BIOS to [RAID]. See 2.3.4 SATA
Configuration for details.
• The motherboard does not provide a floppy disk drive connector. You could use a USB
floppy disk drive when installing Windows
that includes a RAID/AHCI set.
• Due to Windows
drive.
• For more details on RAID/AHCI, refer to the RAID/AHCI Supplementary Guide included
in the folder named Manual in the support DVD.
ASUS M4A88T-M
SATA4
SATA1
XP Service Pack 1 or later versions before using Serial ATA.
®
XP limitation, Windows
®
SATA5
SATA6
SATA2
SATA3
XP operating system on a hard disk drive
®
XP may not recognize the USB floppy disk
®
1-25
Hide quick links:
Advertisement
Table of Contents
