System Panel Connector - Asus M4A88T-I DELUXE User Manual

6. System panel connector (10-1 pin PANEL)
This connector supports several chassis-mounted functions.
M4A88T-I DELUXE
M4A88T-I DELUXE System panel connector
• System power LED (2-pin PWR LED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin HD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HD LED lights up or flashes when data is read from or written to
the HDD.
• ATX power button/soft-off button (2-pin PWR BTN)
This connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
7. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either High Definition Audio or AC`97 audio standard. Connect one end of the front
panel audio I/O module cable to this connector.
M4A88T-I DELUXE
M4A88T-I DELUXE Front panel audio connector
• We recommend that you connect a high-definition front panel audio module to this
• If you want to connect a high definition front panel audio module to this connector, set
• The front panel audio I/O module is purchased separately.
1-22
SENSE2_RETUR
SENSE1_RETUR
PRESENCE#
GND
HD-audio-compliant
connector to avail of the motherboard high-definition audio capability.
the Front Panel Select item in the BIOS to [HD Audio]. See section 2.5.3 Onboard
Devices Configuration for details.
F_PANEL
Reset
GND
Ground
PWR
HD_LED-
PLED-
HD_LED+
PLED+
AAFP
PORT2 L
SENSE_SEND
PORT2 R
PORT1 R
PORT1 L AGND
PIN 1
pin definition compliant definition
NC
Line out_L
NC
NC Line out_R
NC
MICPWR
MIC2
PIN 1
Legacy AC'97
Chapter 1: Product introduction