Nokia E66 - E66 - Cell Phone User Manual page 137

often, for available networks in the background. WLAN
switches off in between background scans.
To stop the background scans, select
Settings Connection
>
WLAN availability > Never. You can still manually
scan for available WLAN networks and connect to WLAN
networks as usual.
To increase the background scan interval, select
WLAN availability > Yes, and define the interval in
Scan for networks.
Q: Why can't I browse the web even though
the WLAN connection is working and the IP
settings are correct?
A: Check that you have defined the HTTP/ HTTPS proxy
settings correctly in the advanced settings of your
WLAN access point.
Q: How do I check the signal quality of my
WLAN connection?
Select Menu Connectivity
>
data connections Options
>
quality is weak or moderate, you may encounter
connection problems. Try again closer to the access
point.
Q: Why do I have problems with the security
mode?
A: Check that you have configured the security mode
correctly, and that it is the same that the network uses.
To check the security mode the network uses, select
Menu Connectivity
> >
connections Options
>
Menu Tools
>
Wireless LAN Show
> >
Show
Conn. mgr. Active
> >
> Details. If the signal
Conn. mgr. Active data
>
> Details.
Check also the following: you have the correct WPA
mode (preshared key or EAP), you have disabled all EAP
types that are not needed, and all the EAP type settings
>
are correct (passwords, user names, certificates).
Q: Why can't I select a contact for my
message?
A: The contact card does not have a phone number, an
address, or an e-mail address. Select
Communic. > Contacts, and edit the contact card.
Q: The note Retrieving message is shown
briefly. What is happening?
A: The device is trying to retrieve a multimedia
message from the multimedia messaging centre. This
note is shown if you have selected
Communic. Messaging
>
Multimedia message
Always automatic. Check that the settings for
multimedia messaging are defined correctly and that
there are no mistakes in phone numbers or addresses.
See "Multimedia message settings", p. 72.
Q: How can I end the data connection when
the device starts a data connection again and
again?
A: The device may be trying to retrieve a multimedia
message from the multimedia message centre. To stop
the device from making a data connection, select
Menu Communic.
>
Settings Multimedia message
>
retrieval Manual
>
messaging centre save messages to be retrieved later,
or Off to ignore all incoming multimedia messages. If
you select Manual, you receive a notification when
Menu
>
Menu
>
Options Settings
> >
Multimedia retrieval
>
Messaging Options
> >
Multimedia
>
to have the multimedia
>
>
>
137