Nokia E66 - E66 - Cell Phone User Manual page 127

EAP plug-ins
1. To define the EAP plug-in settings, select
New access point and define an access point that
uses WLAN as a data bearer.
2. Select 802.1x or WPA/WPA2
3. Select WLAN security settings
EAP EAP plug-in settings.
>
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN
using the access point, select the desired plug-in and
Options > Enable. The EAP plug-ins enabled for use
with this access point have a check mark next to them.
To not use a plug-in, select
To edit the EAP plug-in settings, select
Edit.
To change the priority of the EAP plug-in settings, select
Options Raise priority
>
in before other plug-ins when connecting to the
network with the access point, or
priority to use this plug-in for network authentication
after attempting to use other plug-ins.
See the device help for more information on EAP
plugins.
Session initiation protocol
(SIP) settings
Select Menu Tools
> >
SIP settings.
Options
as the security mode.
WPA/WPA2
>
Options > Disable.
Options
>
to attempt to use the plug-
Options Lower
>
Settings Connection
>
Session initiation protocols (SIP) are used for creating,
modifying, and terminating certain types of
>
communication sessions with one or more participants
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings
for these sessions. The SIP profile used by default for a
communication session is underlined.
>
To create a SIP profile, select
profile Use default profile
>
profile.
To select the SIP profile you want to use by default for
communication sessions, select
profile.
Edit SIP profiles
Select Options > Edit, and select from the following:
Profile name — Enter a name for the SIP profile.
•
Service profile
•
Default access point
•
use for the internet connection.
Public user name
•
from your service provider.
Use compression
•
Registration — Select the registration mode.
•
Use security — Select if security negotiation is
•
used.
Proxy server — Enter the proxy server settings for
•
this SIP profile.
Registrar server
•
settings for this SIP profile.
>
Options New SIP
>
or Use existing
Options
>
— Select IETF or Nokia 3GPP.
— Select the access point to
— Enter your user name received
— Select if compression is used.
— Enter the registration server
Default
127