Removing An Optical Disc - HP 455 User Manual

Removing an optical disc

1. Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out
the tray (2) until it stops.
2. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE:
3. Close the disc tray and place the disc in a protective case.
If the disc tray does not open normally, see
48 Chapter 7 Managing and sharing information
If the tray is not fully accessible, tilt the disc carefully as you remove it.
Disc drive problems on page 80.