Brother P-Touch PT-2730 User Manual page 83

Message
Insert
0.35" Tape
Cassette! *
Insert
9mm Tape
Cassette! *
Insert
0.23" Tape
Cassette! *
Insert
6mm Tape
Cassette! *
Insert
0.13" Tape
Cassette! *
Insert
3.5mm Tape
Cassette! *
Too Much Text
For This Layout! *
Incorrect
Value! *
Select Other
Cut Option! *
Text
Too Long! *
Text
Too High! *
Memory Full! *
*Press any key to clear the error message.
An 0.35" (9 mm) tape cassette is not installed when an Auto-
Format for 0.35" (9 mm) tape is selected. Install a 0.35" (9
mm) tape cassette.
An 0.23" (6 mm) tape cassette is not installed when an Auto-
Format for 0.23" (6 mm) tape is selected. Install a 0.23" (6
mm) tape cassette.
An 0.13" (3.5mm) tape cassette is not installed when an
Auto-Format for 0.13" (3.5mm) tape is selected. Install an
0.13" (3.5mm) tape cassette.
The maximum number of characters for the selected layout
have already been entered. Edit the text to use fewer
characters or use a different layout.
The value entered for setting the tape length, tab length,
multiple copies or numbering function is invalid. Enter a valid
value for the setting.
The tape length set using the tape length setting is shorter
than the total length of the left and right margins applied for
the "Large Margin" cutting option. Select a different cutting
option. option.
The length of the label to be printed using the text entered is
longer than the length setting. Edit the text to fit within the set
length or change the length setting.
The text size is too large. Select a different size option.
There is not enough internal memory available when you try
to save a label file. Delete any unnecessary files to make
more memory available for the new label file.
Cause/Remedy
1
2
3
4
5
6
7
8
9
76
Error Messages