Setting The Time Zone; Viewing The System Status - Toshiba 40UL605U Owner's Manual

Setting the time zone

The Time Zone setup will allow you to specify the
correct time zone for your region. This feature will
allow the TV status information to show the correct
time zone information ( page 61).
To set the time zone:
1
From the Setup menu, highlight Installation and
press . A new set of Installation menu icons will
appear.
2
Highlight Time Zone, and press
3 Press W or X to select the region, highlight Done,
and then press .
After the time zone has been set, you will be asked to
set the current Daylight Saving Time status.
To set the Daylight Saving Time status:
1 Press W or X to select Yes or No, highlight Done,
and then press .

Viewing the system status

To view the system information:
1
and open the Setup menu.
Press
2
Highlight Installation and press
3
A new set of Installation menu icons will appear.
Open the System Status menu, highlight System
Information, and press
4 Press WX to scroll through the menu bar to select
the Factory Defaults or Support Information and
view the related information.
To close the screen and return to the
Installation menu:
Highlight Done and press
To return to normal viewing:
Press .
Chapter 5: Setting up your TV
.
.
.
.
To view the Connective information:
1
Press and open the Setup menu.
2
Highlight Installation and press
3
A new set of Installation menu icons will
appear. Open the System Status menu, highlight
Connective information, and press
To close the screen and return to the
Installation menu:
Press .
To return to normal viewing:
Press .
Reset Factory Defaults
To reset all settings and channels to their
factory default values:
1
and open the Setup menu.
Press
2
Highlight Installation and press
Installation menu icons will appear.
3
Open the System Status menu, highlight System
Information, and press
4 Press WX to scroll through the menu bar to select
Factory Defaults.
5
Highlight Yes and press
6
(If PIN code has been set, enter your PIN code. Press
W or X to select Done and press
message will appear, select Yes and press
will turn off automatically after a few seconds. After
the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset:
Select No and press
in step 5 above.
.
.
. A new set of
.
.
.) A warning
, the TV
37