Audio Output Select; Sleep Timer - Sharp LC-32SH10U Operation Manual

Useful adjustment settings

Audio output select

Allows you to select what controls the audio output.
Press MENU and the MENU screen
1
displays.
Press / to select
2
Press / to select "SPEAKERS".
3
Press / to select "ON" or "OFF".
4
AUDIO
MTS
BASS
TREBLE
BALANCE
SPEAKERS
:SELECT
Selected item
• Sound via speaker is adjusted with
ON
VOL +/ – on the remote control unit or
VOL – /+ on the TV.
• Sound via the AUDIO OUTPUT
terminal is not adjustable and outputs
at a consistent level.
OFF
• Sound via the AUDIO OUTPUT
terminal is adjusted with VOL +/ – on
the remote control unit or VOL – /+ on
the TV.
• Sound via speaker is muted.
Press EXIT to return to the normal screen.
5
(AUDIO).
STEREO
25
25
0
ON/OFF
:ADJUST
Description

Sleep timer

Allows you to set a time when the TV automatically
switches to standby.
Each time you press SLEEP, the remaining
1
time setting switches as shown below.
SLEEP
0h00m
(Sleep timer off)
SLEEP
0h10m
step up by 10 minutes
SLEEP
1h50m
SLEEP
2h00m
This display will disappear after a few
seconds, the sleep timer automatically
starts counting down.
•
If you want to adjust the sleep timer again, you
can press SLEEP repeatedly then change the
time setting.
Press SLEEP.
2
• The remaining time displays when the sleep
timer has been set.
SLEEP
0h07m
NOTE
• Select "0h00m" by pressing SLEEP repeatedly to cancel
the sleep timer.
• The TV will enter the standby mode when the remaining
time reaches zero.
29